BlueZone_UIS_FTP

FTP使用BlueZone

美国FTP图标将启动一个FTP会话，用于与美国大型机之间的文件传输。

FTP图标将允许用户自定义连接和传输文件到/从任何其他FTP站点。

FTP_01

登录“UIS FTP”。

  1. 输入您的 用户ID。
  2. 输入您的 ui的密码, followed immediately by a colon, then your 美国 number (format = 密码:美国, no spaces).
  3. 点击 好的。

FTP主界面

BlueZone FTP Client的主屏幕如下所示。 在屏幕的左侧是当前PC目录下的文件（在本例中为C:）。 屏幕右侧列出的文件位于当前的UIS目录（在本例中为INFMAH）中。

FTP_02

For details on using and configuring the BlueZone Secure FTP, see the BlueZone帮助文件.

快速文件传输

有三种快速传输文件的方法：

  • 选项1: 单击并将它从屏幕的一边拖到另一边。 当您松开鼠标按钮时，文件将被传输。
  • 选项2: 点击 on a file to select it, then click on either the 发送文件 or 接收文件 buttons along the top menu. 或者,
  • 选项3: 右键单击一个文件，选择它并弹出一个上下文敏感的菜单。 Select 收到 to download a file to your PC. Select 发送 to upload a file to the mainframe.

    请注意: The FTP session will 不使用五分钟后自动超时断开。 There is no warning or pop-up message. In this case, go to the 会话 menu, select 连接 and log in again.

    改变目录

    • 主机: 点击 in the UISA 目录 field, delete the existing directory name, and type the directory name that you want to go to. You 必须 include a 单引号 ( ‘ )at the beginning and end of your directory name, such as ‘SO.USER.INFMAH’. You can also go up or down the directory chain by either clicking on the 了文件夹 button (next to the directory field) or by double-clicking on a folder icon in the file list, respectively.
    • PC: 点击 in the Local 目录 field, delete the existing directory name, and type the directory name that you want to go to. You can also go up or down the directory chain by either clicking on the 了文件夹 button (next to the directory field) or by double-clicking on a folder icon in the file list, respectively.

    传输类型

    By default, the transfer type is set to 汽车。 This means that BlueZone will determine whether to transfer the file in ASCII or in Binary format. 这可以手动更改。

    • ACII: 点击 on the ABCD button (most 数据 transfers should use this).
    • 二: 点击 on the 101011 button (most 程序 transfers should use this).
    • 汽车: 点击 on the AB / 10 button.

    在美国设置文件规格

    When transferring a file to the UIS mainframe (uploading), it may be necessary to provide the file’s specifications: logical record length, block size, and number of tracks (if it is sufficiently large). To do this, select 自定义 from the 命令 menu (see below).

    FTP_03

    输入适当的站点命令。 （在下面的示例中，记录格式设置为fixed，逻辑记录长度设置为800，块大小设置为8000。）

    FTP_04

    点击 好的。 Confirmation of the command is displayed in the status window below the PC and mainframe directory listing windows. (See below, 接受SITE命令).

    FTP_05

    设置FTP会话默认值

    You can set the way that BlueZone FTP starts — specifically, what PC and what UIS directories are displayed when you first log in. 如果要重复传输文件，设置这些默认值会很方便。

    First, select 配置 from the 会话 menu (see below).

    FTP_06

    Next, click on the 编辑 button from the 会话配置 dialog box (see below).

    FTP_07

    Finally, in the 连接 tab, enter (or browse to) the path for:

    • PC初始目录
    • Initial Host 目录 (注意: be sure to begin and end the directory name/path with a 单引号 ( ‘ ). 参见下面的示例。)

    FTP_08

    More details on setting the initial directory can be found in the 连接选项卡 sub-section of the 连接主机系统 section in the BlueZone帮助文件.

    BlueZone  FTP to Another (Non-UIS) Site

    BlueZone可以用于向其他非美国网站传输文件。 点击 on the FTP桌面图标。 Then, click on 连接 from the 会话 menu and fill in the 连接 Name, Host Address, and any other necessary information for connecting to the FTP site, then click 好的。 (See below.)

    FTP_09

    You’ll next be prompted for 用户ID和密码。

    See the BlueZone帮助文件 for details on configuring and using the FTP client for non-UIS sites.

    如果你有问题， please contact us at 617-353-4868 or  [email protected].